Sharing Ideas

Heat pumps: what are the next key dates in the EU?

Keeping a comfortable temperature throughout the year has become a must. Not so long ago, people used to just have a stove to heat the house in winter, with temperature control based on their own perception and opening windows when feeling the temperature was too high. Moreover, heating and cooling have been traditionally considered as separate concepts, different fields of study… or even...
Read More About Heat pumps: what are the next key dates in the EU? »

Relative humidity and printability

The printing industry features a multitude of different technologies that can be used, from traditional printing (such as offset printing, rotogravure printing, screen printing, etc.) to digital printing (for example, inkjet or laser).  The processes underlying these technologies are quite different, but they all share one need: to control humidity in the processing and storage...
Read More About Relative humidity and printability »

DCW Singapore: opportunities for Data Centre energy savings in tropical regions

Carel’s recent participation at “ Data Center World ” (DCW) Asia in Singapore was a great opportunity to meet some of the industry’s leading players in the southeast Asian area, addressing issues relating to data centre cooling in this region specifically and throughout Asia in general. This part of the world is experiencing strong economic growth, and with this comes a considerable...
Read More About DCW Singapore: opportunities for Data Centre energy savings in tropical regions »

Looking for alternative refrigerants to R-410A @ Heat Pump Summit in Nuremberg

Late 2017. “What is the replacement refrigerant for R-410A” is the question that perhaps more than any other is being asked in the HVAC industry. This is a consequence of other factors, such as: how much will R410A cost in the next semester ? Will it continue to be so difficult to source as has been the case for the last few months? Personally, I tried to find a response by participating...
Read More About Looking for alternative refrigerants to R-410A @ Heat Pump Summit in Nuremberg »

ATMOsphere Ibérica: how to cool when it’s really hot?

With an outdoor temperature of 26°C on 24 October, it could be said that the weather in Madrid was in line with the main focus of the first ATMOsphere Ibérica event: the challenges of natural refrigerants in warm climates. “Climatic conditions in Spain, Portugal and Latin American make the transition to natural refrigerants, in particular CO 2 , more difficult”, stated Alvaro de Oña, the...
Read More About ATMOsphere Ibérica: how to cool when it’s really hot? »

How can I choose the right humidification system for a paint booth?

This is the third and final discussion on paint booth applications. If you haven’t read the previous ones yet, please don’t forget to check them out! Today I’m going to talk about the best humidification solution for this specific application.  First of all, there is no one overall best solution, rather it depends on the requirements of each individual installation. A good...
Read More About How can I choose the right humidification system for a paint booth? »

Why does humidity need to be controlled in the printing industry?

Paper is a hygroscopic material that tends to reach a condition of equilibrium with the temperature-humidity conditions of the surrounding environment. Any swings in temperature and humidity can cause dimensional variations and loss of paper flatness . These phenomena are well-known to those who work in the printing industry as, if not appropriately controlled, they can...
Read More About Why does humidity need to be controlled in the printing industry? »

Relative humidity inside paint booths: what causes deviations from optimum conditions?

Paint booths are closed, air-conditioned spaces in which the ambient conditions are kept at the ideal values to ensure both a high quality finish of the coated surfaces and safety of the personnel working inside . Temperature, humidity and cleanliness of the air are ensured by an appropriate ventilation system . The conventional solution is an “all outside air” ventilation...
Read More About Relative humidity inside paint booths: what causes deviations from optimum conditions? »

How will commercial refrigeration develop in the future?

Undoubtedly, the expansion of commercial refrigeration is likely to continue due to the growing importance of food preservation . The food chain from “ field to fork ” must be able to guarantee food quality and safety , and above all for fresh products with a short shelf-life this can only be ensured by low temperature transport and storage, so as to prevent bacterial growth: indeed, ...
Read More About How will commercial refrigeration develop in the future? »

Eureka Roadshow Italy

On September 15, 2017, the Eureka Roadshow Italy , organised by EPEE and EVIA, with Centro Studi Galileo as its partner and CAREL and ZIEHL-ABEGG as sponsors , was held at the nh Laguna Palace Hotel in Mestre (Venice). The purpose of the event was to share the conclusions of Eureka 2016 (The Hague, 13/12/2016) with an audience of manufacturers, industry associations, consultants,...
Read More About Eureka Roadshow Italy »
Showing 1 - 10 of 46 results.
Items per Page 10
of 5

Topics

To find out more

 

 

Bloggers

Miriam Solana Ciprés
posts: 14
Date: 12/7/17
Sofia Coin
posts: 3
Date: 11/30/17
Enrico Boscaro
posts: 3
Date: 11/23/17
Biagio Lamanna
posts: 4
Date: 11/16/17
Andrea Pagan
posts: 3
Date: 11/2/17
Luigi Nalini
posts: 1
Date: 10/12/17
Raul Simonetti
posts: 5
Date: 10/5/17
Anthony Harrigan
posts: 1
Date: 9/28/17
Serena Ometto
posts: 2
Date: 8/24/17
Roberto Sandano
posts: 1
Date: 7/6/17
Andrea Oscar Frisiero
posts: 3
Date: 6/15/17
Tommaso Ferrarese
posts: 1
Date: 5/25/17
Carlo Bertelé
posts: 1
Date: 5/18/17
Nicola Coccato
posts: 1
Date: 4/13/17
Valerio Nalini
posts: 3
Date: 4/6/17